Point-Of-Sales-ap50001
Point-Of-Sales-ap5000

HP AP5000

HP is a renown brand producing a nice and stylish P.O.S system for food & beverages or retail business.

Product Description

The HP ap5000 All-in-One Point of Sale System is designed to take the guesswork out of creating a point-of-sale hardware solution and meet the space and performance requirements of retailers of all sizes. Ruggedized for retail, yet stylish enough for even the most high-end settings, the HP ap5000 POS System fits your existing retail ecosystem with ease.

1. Systems may require upgraded and/or separately purchased hardware and/or an external DVD drive to install the Windows 7 software and take full advantage of Windows 7 functionality.

2. Dual Core is designed to improve performance of multithreaded software products and hardware-aware multitasking operating systems and may require appropriate operating system software for full benefit. Not all customers or software applications will necessarily benefit from use of this technology.

3. 64-bit computing on Intel architecture requires a computer system with a processor, chipset, BIOS, operating system, device drivers and applications enabled for Intel® 64 architecture. Processors will not operate (including 32-bit operation) without an Intel 64 architecture-enabled BIOS. Performance will vary depending on your hardware and software configurations.

4. Intel’s numbering is not a measurement of higher performance.

5. Up to 4 GB may not be available with 32-bit operating systems due to system resource requirements. (1-3 GB available with 32 bit operating system)

6. GB = 1 billion bytes. Actual formatte

Feature Description
Processors : Intel Celeron 440
Intel Core Duo E7400
Chipset : Intel Q965 Northbridge with ICH8R Southbridge
Graphics : Integrated Intel Graphics Media Accelerator 3000
Display : 15 inch diagonal TFT dual-bulb display, 1024 x 768 resolution,
with 5-wire resistive type  touchscreen, liquid and dust resistant
up to IP55.  Precalibrated at factory but should be recalibrated
after initial software via the calibration wizard. Can use stylus,
finger tip, finger nail, or credit card edge to perform touch.
Memory : Dual-channel,  DDR2 up to 4GB DIMMS, 2 slots, supports
667/800 MHz,most configurations ship with 1 x 2GB or
1 x 1GB + 1 x 2GB (3GB)
NOTE: DDR 2 800 MHz will clock down to 667 MHz.
NIC : Realtek RTL8111C Ethernet Connection, 10/100/1000, with WOL support
Keyboard : PS/2 or USB supported (not included).
NOTE: A keyboard is required to unbundle the software image.
Pointing Device : USB supported (not included)
Magnetic stripe reader (MSR) : Multi-channel, fully integrated MSR, confirms to ANSI/ISO 7810,
7811 1/5, 7812, and 7813; supports OPOS driver layer; 3 tracks:
IATA, ABA, THRIFT; bi-directional swipe; LED indicates status of reader
Vacuum Florescent Display (VFD) : 2 line x 20 character display (40 characters total), RS232 interface,
DC5V (COM port set to 5 V at factory in BIOS setup).  Supports complex
character set, control commands, user-defined fonts and international fonts.
Display pitch adjustment only (10deg to 90deg), no height adjustment.
WARNING: Display must only plug into COM 1 or COM 2
(not COM 3 since COM 3 does not support DC5V)
Storage : Hard Drive – (2) 2.5 inch internal hard drive bays: 160GB 2.5 inch
(select models), 64GB solid sate 2.5 (some models) inch.
Optical Drive – External USB only (not included)
NOTE: An optical drive is required to restore the software image.
Audio/Visual : Intel integrated high-definition audio with 2-channel Via VT1708S codec
Power Manager : Advanced Configuration and Power Management Interface (ACPI).
Controls system power consumption, making it possible to
place individual cards and peripherals in a low-power or
powered-off state without affecting other elements of the system.
NOTE: Power button is located on I/O panel and concealed under the I/O cover.
concealed under the I/O cover.
SMBIOS : System Management BIOS, previously known as DMI BIOS,
for system management information
Security : Kensington Lock Support, BIOS TBD
Power Supply : 130 W ac power adapter, ENERGY STAR 5.0 qualified,
European Union 2005/32/EC (EUP LOT 6,  EUP LOT 7),
 input 90 to 260 V ac; Frequency range 47 to 63 Hz
Wall mounting : Mount will allow the ap5000 to be mounted on the wall and
It will be sold as AMO (BT390AA) and would include the mount
(metal plate), screws, and molly bolts.  622311-001
Advertisement panel : This non-electrical panel features a clear cover. It may be
removed so that print material/advertisements can be displayed.
HP provides a template for the advertisement panel.
Compact Flash 1 slot, support compact flash type II
USB 2.0 5 (located at bottom of main display behind access panel),
1 left side (behind access panel)
Audio line out 1
Microphone in 1
Power connector DC 19 V for 130 W ac power adapter
RJ-45/Ethernet 1
RS232 ports Com 1 and 2 (5 V configurable in BIOS), Com 3 (12 V configurable in BIOS)
USB and power 24 V
Keyboard (PS/2 1
Parallel port 1

Currently this AP5000 do not have any optional or accessories parts.